Manualshelf

FIPS Security Seal Procedures for Brocade MLXe Series Brocade NetIron CES 2000 Series and Brocade NetIron CER 2000 Series

ManualsBrandsExtreme Networks ManualsComputers & AccessoriesMultiservice IP/MPLS Core, WAN Edge, Border Router, IPSec Router and Network Packet Broker
12345678910
FIPS Security Seal 9 of 18
Publication Number: 53
-
1002118
-
01
Rear: Affix two vertically-oriented seals from the top panel of the chassis covering a portion of the fan unit
lip. One seal will be to the left of the upper leftmost securing post; and the other seal will be to the right of
the rightmost securing post. You must bend these seals to position them correctly. See FIGURE 4 for
correct seal orientation and positioning.
FIGURE 4 Rear and side view of a Brocade MLXe-8 device with security seals
2
1 to 2 = FIPS security seals
1