FIPS Security Seal Procedures for Brocade MLXe Series Brocade NetIron CES 2000 Series and Brocade NetIron CER 2000 Series

8 of 18 FIPS Security Seal
Publication Number: 53-1002118-01
Applying seals to a Brocade MLXe-8 device
Use the figures in this section as a guide for security seal placement on a Brocade MLXe-8 device. Each
Brocade MLXe-8 device requires the placement of 17 seals:
• Front: Affix 15 seals—one seal from each module to the front panel of the chassis. The seal for the
Management Module (MM) is vertically oriented and is positioned so that half is affixed to the top panel of
the chassis and half of the seal is affixed to the control module. You must bend this seal to position it
correctly. See FIGURE 3 for correct seal orientation and positioning.
FIGURE 3 Front view of a Brocade MLXe-8 device with security seals
1 to 15 = FIPS security seals
10
9
11
12
13
14
14
8
1
2
3
4
5
6
7
15