Technical Specs

ExtremeSwitching CES and
ExtremeRouting CER 2000 Series
Technical Specications
This document highlights the features and specications for CES/CER 2000 Series devices.
NOTE
Beginning with NetIron OS 6.3.00a and later, the ExtremeSwitching CES 2000 Series devices are not supported. Refer to the
End of Sale and End of Support page for additional information.
System specications
System component Description
Enclosure 1U
Power inlet C14
Power supplies One internal AC or DC power supply, 1+1 redundancy
Fans 6
Cooling Six 4-speed fans; front-to-back airow
Ethernet
System component Description
SFP GbE ports 24 SFP, 4 Combo, 2 XFP
24 SFP, 4 Combo, 4 SFP+
48 SFP, 2 XFP
Ethernet management port 10/100/1000 MbE RJ-45
LEDs
System component Description
10/100/1000 Port LEDs
Lnk/Act Indicates whether a link is up or down and the port is transmitting and receiving trac
10-Gbps Port LEDs on devices with two or four 10-Gbps ports
Lnk/Act (2 LEDs) Indicates whether the ber port is connected and the trac is being transmitted and received on the ber port
Power and fan status LEDs
Fan Indicates the status of the fan tray
AC PS1 Indicates whether power supply 1 is installed and operating normally
ExtremeSwitching CES and ExtremeRouting CER 2000 Series Technical Specications
9035629-01 5