TECHNICAL SPECIFICATION ExtremeSwitching CES and ExtremeRouting CER 2000 Series Technical Specifications 9035629-01 November 2018
Copyright © 2018 Extreme Networks, Inc. All Rights Reserved. Legal Notice Extreme Networks, Inc. reserves the right to make changes in specifications and other information contained in this document and its website without prior notice. The reader should in all cases consult representatives of Extreme Networks to determine whether any such changes have been made. The hardware, firmware, software or any specifications described or referred to in this document are subject to change without notice.
Contents ExtremeSwitching CES and ExtremeRouting CER 2000 Series Technical Specifications................................................................................ 5 System specifications...............................................................................................................................................................................................................................5 Ethernet......................................................................................
ExtremeSwitching CES and ExtremeRouting CER 2000 Series Technical Specifications 9035629-01
ExtremeSwitching CES and ExtremeRouting CER 2000 Series Technical Specifications This document highlights the features and specifications for CES/CER 2000 Series devices. NOTE Beginning with NetIron OS 6.3.00a and later, the ExtremeSwitching CES 2000 Series devices are not supported. Refer to the End of Sale and End of Support page for additional information.
Other System component Description AC PS2 Indicates whether power supply 2 is installed and operating normally DC Indicates whether the power supply has DC power Other System component Description Serial cable EIA or TIA DB9 serial cable RJ-45 connector 10/100/1000 copper Weight and physical dimensions Model Height Width Depth Weight CES 2000 Series 2024C-4X 4.4 cm 44.3 cm 43.9 cm 9.4 kg 1.7 inches 17.4 inches 17.3 inches 20.
Power consumption (idle configuration) Model Height Width Depth Weight CER 2000 Series 2024F-4X-RT with 4x10G uplink installed 4.4 cm 44.3 cm 43.9 cm 9.9 kg 1.7 inches 17.4 inches 17.3 inches 21.8 lb CER 2000 Series 2024F 4.4 cm 44.3 cm 44.8 cm 7 kg 1.7 inches 17.4 inches 17.6 inches 15.5 lb 4.4 cm 44.3 cm 44.8 cm 7.9 kg 1.7 inches 17.4 inches 17.6 inches 17.
Power consumption (typical configuration) Model name @100 VAC input @200 VAC input @-48 VDC input Minimum number of power supplies Notes BR-CES-2024C-4X AC & DC 1.64 A 0.86 A 2.96 A 1 184 W 182 W 158 W 628.79 BTU/hr 619.30 BTU/hr 540.63 BTU/hr Input current only 1 PSU installed. Watts and BTU/hr with 2 PSUs. 1.87 A 0.98 A 2.98 A 1 205 W 189 W 162 W 699.51 BTU/hr 643.19 BTU/hr 553.74 BTU/hr Input current only 1 PSU installed. Watts and BTU/hr with 2 PSUs. 1.87 A 0.98 A 2.
Power consumption (maximum configuration) Model name BR-CER-2024C-4XRT with 4x10G Uplink AC & DC BR-CER-2024C-4XRT AC & DC BR-CER-2024F-4XRT with 4x10G uplink AC & DC BR-CER-2024F-4XRT AC & DC @100 VAC input @200 VAC input @-48 VDC input 217 W 213 W 167 W 740.13 BTU/hr 726.54 BTU/hr 579.95 BTU/hr 2.34 A 1.20 A 3.96 A 246 W 243 W 210 W 840.14 BTU/hr 829.58 BTU/hr 714.63 BTU/hr 1.94 A 1.01 A 3.16 A 208 W 205 W 171 W 708.69 BTU/hr 698.18 BTU/hr 583.23 BTU/hr 2.83 A 1.44 A 4.
Data port specifications (Ethernet) Model name @100 VAC input @200 VAC input @-48 VDC input Minimum number of power supplies Notes BR-CER-2024F-4XRT with 4x10G uplink AC & DC 3.03 A 1.53 A 4.56 A 1 315 W 298 W 239 W 1075.87 BTU/hr 1017.54 BTU/hr 815.32 BTU/hr Input current only 1 PSU installed. Watts and BTU/hr with 2 PSUs. 2.54 A 0.94 A 3.64 A 1 271 W 254 W 195 W 672.79 BTU/hr 666.34 BTU/hr 665.14 BTU/hr Input current only 1 PSU installed. Watts and BTU/hr with 2 PSUs.
Regulatory compliance (EMC) Serial port specifications (pinout RJ-45) Pin Signal Description 1 TD+ Transmit data 2 TD- Transmit data 3 RD+ Receive data 4 Not used (10BaseT) Not used 5 Not used (10BaseT) CMT (100BaseTX) Not used CMT (100BaseTX) 6 RD- Receive data 7 Not used (10BaseT) Not used 8 Not used (10BaseT) CMT (100BaseTX) Not used CMT (100BaseTX) Serial port specifications (protocol) Parameter Value Baud 9600 Data bits 8 Parity None Stop bits 1 Flow control None
Regulatory compliance (safety) • EN 61000-3-2 • EN 61000-3-3 • EN 61000-6-1 Regulatory compliance (safety) • CAN/CSA-C22.2 No.