Specifications

W W W.EXTREMENETW ORKS.COM 2
Operating Specifications
- Operating Temperature: 0°C to 45°C (32°F to 113°F)
- Storage Temp: -40 °C to 70°C (-40°F to 158°F)
- Humidity: 10% to 95% relative humidity,
non-condensing
Environmental Specifications
- EN/ ETSI 30 0 0 19-2-1 v2.1.2 ? Class 1.2 Storage
- EN/ ETSI 30 0 0 19-2-2 v2.1.2 ? Class 2.3 Transportation
- EN/ ETSI 30 0 0 19-2-3 v2.1.2 ? Class 3.1e Operational
- EN/ ETSI 30 0 753 (1997-10 ) ? Acoustic Noise
- ASTM D3580 Random Vibration Unpackaged 1.5G
Environmental Compliance
- EU RoHS 2011/ 65/ EU
- EU W EEE 2012/ 19/ EU
- China RoHS SJ/ T 11363-2006
- Taiwan RoHS CNS 15663(2013.7)
Regulatory and Safety
North American ITE
- UL 60 950 -1 (U.S.)
- UL 62368-1
- CSA 22.2 No. 60 950-1 (Canada)
- Complies with FCC 21CFR 10 40.10 (U.S. Laser Safety)
- CDRH Letter of Approval (US FDA Approval)
European ITE
- EN 60950 -1
- EN 60825-1
- EN 62368-1
- IEC 60 825-1 Class 1 (Lasers Safety)
International ITE
- CB Report & Certificate per IEC 60950 -1
- AS/ NZS 60950 -1 (Australia / New Zealand)
- IEC 62368-1
Ports
- 2 x 1Gb/ 10Gb SFP+ (to connect to the external network)
- 2 x 1Gb/ 10Gb SFP+ (to connect to the host switch; host cables included)
Dimensions - 2.99 in W / 4.87 in L / 1.18 in H (76 cm / 123.5 cm / 30 cm)
Weight - 17.2 oz / 488 g
Product Specifications
Physical
MACsec
The Adapter supports the IEEE 802.1AE standard for MACsec,
including 128-bit and 256-bit Advanced Encryption
Standard (AES) for secure link encryption. By encrypting
traffic from the host switch through the Adapter, it ensures
secure communications for all Ethernet traffic across the
external link. MACsec functionality can be provided to
either 1Gb SFP or 10 Gb SFP+ ports on the host switch.
Power
The Adapter can receive power from the host switch via
host cables included w ith the Adapter. Depending on
configuration, the Adapter may require auxiliary power. A
USB (micro-B) cable is included w ith the Adapter for
instances when auxiliary power is needed. Please refer to the
ExtremeSwitching Hardware Installation Guide for details.
Warranty
The adapter is covered by the warranty for the switch
it is connected to. For warranty details, visit:
http:// www.extremenetworks.com/ go/ warranty.
LRM/ MACsec Adapter Supported
Platforms
The LRM/ MACsec Adapter is fully managed and
configured from the host switch and is supported on the
following ExtremeSwitching platforms:
- X440 -G2 Series
- X450 -G2 Series
- X460 -G2 Series
- X590 Series
Note: ExtremeXOS version 30 .1 or later must be installed on the host
switch. X590 supported with ExtremeXOS version 30.2 or later
See the LRM/ MACsec Adapter Hardware Installation Guide
for latest information on supported switches/ ports in the
?Maximum Number of LRM/ MACsec Adapters, by Switch
Model and Connection Type? table.
- X620 Series
- X670 -G2 Series
- X690 Series