Installation Guide

The following are the minimum software versions that are required for use with XN-ACPWR-xxx-FB
PSUs and the switch:
• EXOS version 31.3.1, EXOS version 30.7.2 for X465 only
• VOSS version 8.3
Previous software versions are not supported with XN-ACPWR-xxx-FB PSUs. You must upgrade to the
listed minimum software version or later to use any of the XN-ACPWR-xxx-FB PSUs with the switch.
The following table lists supported PSU combinations when dual redundant PSUs are used on the
switch.
Refer to the 5520 datasheet for appropriate PSUs for the switch.
Table 175: PSU Redundancy Compatibility Notes
Switch Model Primary PSU Secondary PSU
Non-PoE models
XN-ACPWR-350W-FB XN-ACPWR-350W-FB
PoE models
XN-ACPWR-715W-FB or
XN-ACPWR-1100W-FB or
XN-ACPWR-2000W-FB
XN-ACPWR-715W-FB or
XN-ACPWR-1100W-FB or
XN-ACPWR-2000W-FB
Table 176: X465 Power Consumption
Switch Model Minimum Heat
Dissipation
(BTU/hr)
Minimum Power
Consumption
(W)
Maximum Heat
Dissipation
(BTU/hr)
Maximum Power
Consumption
(W)
X465-24MU switch 257 75 963 1722
X465-24MU-24W switch 326 96 1614 3941
X465-24S 178 52 589 172
X465-24W switch 236 61 1110 2485
X465-24XE 271 79 707 207
X465-48P switch 280 82 1046 1747
X465-48T switch 250 74 600 176
X465-48W switch 316 93 1708 4016
X465i-48W 261 76 1762 4031
Technical Specifications Power Options
ExtremeSwitching Hardware Installation Guide 413