Installation Guide

2 = USB A port 4 = 10/100/1000BASE-T PoE+ ports
Note
*2.5Gb uplink support is a future capability
The rear panel of the X435-8P-4S switch includes:
• AC power input socket
The internal AC power supply operates from 100VAC to 240VAC.
Figure 4: X435-8P-4S Rear Panel
ExtremeSwitching X435-8P-2T-W Switch Features
The front panel of the X435-8P-2T-W switch includes:
• Eight 10/100/1000BASE-T PoE+ ports that provide 8 Gbps of high-density copper connectivity. In
addition, all of these ports (ports 1-8) support the POE protocol IEEE802.3af and PoE+ protocol
IEEE802.3at standard.
All X435 PoE models can provide up to 15.4W by using PoE protocol, and provide up to 30W by
using PoE+ protocol on a single port.
• Two unpopulated 10/100/1000BASE-T 802.3bt ports that support copper connectivity
• One RJ-45 console port
• One USB A port
• LEDs to indicate port status and switch operating conditions
Note
The mode button has no function associated with it and is not expected to have any function
associated with it in the future.
For a description of the LEDs and their operation, see ExtremeSwitching X435 Series Switch LEDs on
page 28
ExtremeSwitching Switches
ExtremeSwitching X435-8P-2T-W Switch Features
ExtremeSwitching Hardware Installation Guide 25