User guide

B-4 Network Infrastructure Manager User Guide
Topology Check if both ends of the trunk:
• have the same port type
• have the same Auto Negotiation/Speed/Duplex setting
• are both fiber or both copper
• have the same PPP parameters
• have the same channel size
• have the same framing
• have the same VLAN tag
• have the same VLAN IP subnet
• have unique VLAN IP addresses
Error
Check if both ends of the trunk have the same VLAN tag Error
Check if the number of links in the load-sharing group on
each end of the trunk are the same
Error
Check if the number of links in the multilink group on each
end of the trunk are the same
Error
VLAN Check if the label equals 'all’ Error
Check if the VLAN has more than one WAN port Error
Check if the VLAN has more than one IPCP MLP or PPP
port
Error
Check if the VLAN's protocol causes a conflict in any of its
member ports
Error
Check if the VLAN’s tag conflicts with its own loopback id Error
Check if the VLAN has been untagged after it was tagged Error
On a Black Diamond, check if the loopback port is not in
the same slot as all the other ports
Error
Check if the IP subnet is not unique among all the VLANs
in the device
Error
If IP MTU >1500, check if jumbo frames are not enabled
on any of the VLAN's member ports
Error
Check if any ports (including multilink ports) are added as
tagged when the VLAN is untagged
Error
Check if the label/name is already in use by an Access List
or a STPD object
Error
Check if the VLAN contains ports that are in another STPD Error
Table B-1: Rules Checked by the NIM client and ISM Provision server (continued)
Object Rule Type