User guide

Network Infrastructure Manager User Guide B-3
Overview
Multilink Port Group Check if the group is not in any VLAN while being enabled Error
Check if the group does not have any ports while being
added to a VLAN
Error
Check if the group is IPCP and is being added to a
Sub-VLAN
Error
Multilink PPP Check if the PPP configuration’s group does not have any
ports while configuring the group to run PPP with BCP or
IPCP.
Error
Port VLAN Config Check if an untagged VLAN is marked as tagged Error
Radius Server Check if TACACS is enabled Error
Route Advertisement Check if min interval > max interval in timer Error
Check if lifetime < max interval in timer Error
STP Domain Check if the STPD’s tag does not match any of its member
VLANs’ tag
Error
Check if the label/name is already in use by an Access List
or an Abstract VLAN (VLAN or Sub-VLAN) object
Error
Sub-VLAN Check if the label equals ‘all’ Error
Check if the VLAN has more than one WAN port Error
Check if the VLAN has more than IPCP MLP or PPP port Error
Check if the VLAN's protocol causes a conflict in any of its
member ports
Error
Check if the VLAN’s tag conflicts with its own loopback id Error
Check if the VLAN has been untagged after it was tagged Error
On a Black Diamond, check if the loopback port is not in
the same slot as all the other ports
Error
Check if a super-VLAN has not been assigned Warning
Check if the super-VLAN's IP address is not configured Error
Check if the IP range does not overlap with the
super-VLAN's IP address
Error/Wa
rning
Check if any ports (including multilink ports) are added as
tagged when the VLAN is untagged
Error
Check if the label/name is already in use by an Access List
or an STPD object
Error
Check if the VLAN contains ports that are in another STPD Error
TACACS Server Check if RADIUS is enabled Error
Table B-1: Rules Checked by the NIM client and ISM Provision server (continued)
Object Rule Type