User guide

Summit GbX Installation and User Guide 7
Installing and Preparing the SummitGbX for Use
I
NITIAL
I
NSPECTION
If the shipping container shows signs of damage, keep it, and all packing materials,
until the SummitGbX has been thoroughly tested and verified. Verify that all contents
are complete, according to the list below:
• SummitGbX in electro-static discharge (ESD) bag
• 19-inch rack mount kit
• Summit GbX Installation and User Guide (this document)
• Power cords (2)
• Software diskette
If any contents are found missing, or if the SummitGbX is found to be damaged, contact
Extreme Networks immediately for assistance.
P
OWER
R
EQUIREMENTS
The SummitGbX is designed to accept 100 to 240 VAC, 50 to 60 Hz main power. The
SummitGbX automatically senses and adjusts for the proper AC voltage level.
Failure to properly ground the SummitGbX can result in personal injury or
equipment damage. Connect the power cord only to a receptacle with a
protective safety ground. Do not defeat the earth grounding protection by using
an extension cord or other device that defeats the safety ground connection.
O
PERATING
E
NVIRONMENT
R
EQUIREMENTS
The SummitGbX is designed to operate in a 10 to 50 degree C ambient environment. Do
not restrict the air intake or exhaust vents.
Obstructing the air intake or exhaust of the SummitGbX may produce internal
temperatures leading to device failure. Do not block the intake or exhaust of the
unit. Do not operate the unit outside its specified temperature range.