User guide

14 Summit GbX Installation and User Guide
Managing the SummitGbX
C
OMMANDS
Table 6 describes the CLI commands.
The factory default login user name is
admin
and the default password is
admin
. The
login name and password are case sensitive.
If VT-100 local echo is enabled, the typed text appears on the local screen.
The first time the system is powered on with the terminal connection plugged in, the
factory default status message appears. Press the [Enter] key to display the login screen.
To log in to the SummitGbX, follow these steps:
1 Type
CMD USR admin
, followed by the [Enter] key.
The cursor blinks at the left edge of the screen, under the command just typed.
Table 6:
CLI Commands
Command Description
Configuration/Status Mode Commands
CMD GLE
Enable Gigabit Ethernet loopback.
CMD GLD
Disable Gigabit Ethernet loopback.
CMD LLE
Enable long distance loopback.
CMD LLD
Disable long distance loopback.
CMD RS?
Request status.
CMD V?
Request software version.
CMD ID xxxxxxxxxxx
Set unit identification (maximum 11 Characters)
CMD I?
Display the factory model and serial numbers.
Password Mode Commands
CMD USR xxxxxx
Enter login name.
CMD PAS xxxxxx
Enter password.
CMD CUSR xxxxxx
Change login name (maximum 15 characters)
CMD CPAS xxxxxx
Change password (maximum 15 characters).
CMD LOG
Logout.
Version Commands
CMD V?
Displays unit identification and software version number.