User guide

Screen/Pane Description
Stacking Displays the active topology for the stack (ring or daisy chain) and for each node: the MAC
address, the slot number in use, the priority used in node role election, alternate management
IP address, alternate gateway, flags (point to a flag to display the Flags Legend) and the
license.
Stack Slot Details Displays configuration and status information for the slot that is selected in the Stacking list.
Configuration--SNMP
This feature allows you to view the SNMP configuration on the switch. The information provided is
useful to view the settings that are used by an SNMP client communicating with the switch. The tool
allows you to view and manipulate the following SNMP features:
•
SNMP settings
•
SNMP v1 and v2c communities
•
SNMP v3 users
•
SNMP trap receivers
•
SNMP statistics
Note
There are no capabilities to make changes to the SNMP configuration in this release.
The figure below shows two SNMP configuration screens that display the content under all of the tabs.
The table below the figure describes its elements.
Configuration
ExtremeXOS ScreenPlay User Guide 22