User guide

Screen/Pane Description
DHCP Allows modification to: DHCP (Dynamic Host Configuration Protocol) Address, Default Gateway,
DNS (Domain Name Servers) Server, WINS (Windows Internet Naming Service) Server, and Lease
Time.
The figure below displays the Ports tab, and the table below it describes its elements.
Figure 14: Configuration—VLAN Details—Port
Screen/Pane Description
Ports
Displays the Flags assigned to the port. Refer to Figure 11: Flags Legend—Configuration
on page 18.
Allows ports to be added and removed, and tagged and untagged. In the Ports panel,
point to a port number to display its Port Properties. In the Flags column, point to flag to
display the Flags Legend.
VLAN Configuration Procedures
Following are common procedures for using VLAN Configuration functions.
Creating VLANs
To create a VLAN:
1 From the VLAN List screen, click the Create command button.
The New VLAN Details pane is displayed. (This pane matches that shown in Configuration--VLANs
on page 18).
2 Type in the required information.
3 To save the configuration, click the Save command button.
The VLAN is saved to the switch.
4 Click the Save Config command button to permanently save the new VLAN.
Deleting VLANs
To delete a VLAN:
Configuration
ExtremeXOS ScreenPlay User Guide 20