Specifications
Open Issues, Known Behaviors, and Resolved Issues
ExtremeXOS 12.4.2 Release Notes
93
PD4-819023271,
PD4-684538103
Running the save configuration command causes a memory leak in the netlogin process.
PD4-878324658,
PD4-765586466
Network login enabled ports are authenticating the switch MAC address in certain
loopback configurations.
PD4-853111507,
PD4-843130728
Network login users are not authenticated if the "Tunnel-Private-Group-ID" attribute value
is set to 0 on a RADIUS server.
OSPF
PD4-875793527,
PD4-929585917
Incoming router LSAs with a router link greater than 420, causes the OSPF process to
crash with an assertion failure.
PD4-974227589,
PD4-896536108
When running OSPFv3 over a 6-in-4 tunnel interface, OSPFv3 treats the interface as
broadcast rather than point-to-point.
PD4-824384216,
PD4-707855673
OSPF stops translating external routes after deleting a static route to the same destination
IP address.
PD4-760942841,
PD4-759590041
After a port in a VLAN is added to an OSPF area, it takes about four seconds to update a
neighboring switch.
PD4-828769034,
PD4-241726909
If two routers, both reachable from one another, originate functionally equivalent AS
external LSAs (same destination, cost, and non-zero forwarding address), the LSA
originated by the router having the highest OSPF router ID is used. The router having the
lower OSPF router ID can then flush its LSA. However, an ExtremeXOS switch does not
purge the functionally equivalent AS external LSA when an Extreme OSPF router ID is
lower.
PD4-861837558,
PD4-767590126
In a jumbo frame environment, an OSPFv3 neighbor gets stuck at EX_START.
PD4-831651183,
PD4-701099374
Setting the ospfSetTrap OID mib-2.14.16.1.1.0 to 0x0000ffff does not cause OSPF to
send out OSPF traps.
PD4-876299607 OSPF crashes in ExtremeXOS_LDP regression testing.
PD4-956060611,
PD4-934588772
When configuring an OSPFv3 timer, the new configuration may not take affect after a
switch reboot.
QoS
PD4-818833752,
PD4-512656071
A HAL process crash occurs when HQoS is used with CLEAR-Flow and CLEAR-Flow rules
are enabled.
ScreenPlay
PD4-817159860,
PD4-552010000
The following message is periodically logged when the Event Log screen is left open in
ScreenPlay:
Login passed for user admin through xml (::)
PD4-860761605,
PD4-774800225
ScreenPlay shows the wrong port speed after setting autonegotiation to off and on
because the XML API returns the incorrect configuration speed after disabling and
enabling autonegotiation.
PD4-902392480,
PD4-776663281
ScreenPlay does not load management information. It just prints "Loading" for the
"Management" information on the dashboard tab.
sFlow
PD4-1083414641,
PD4-962328921
VRRP advertisement packets are dropped when sFlow sampling is enabled.
SNMP
PD4-769355749 When more than five SNMP requests are received by a switch, the switch only responds
to five requests at a time.
Table 44: Platform-Specific and Feature PDs (Continued)
PD Number Description