Specifications

Overview
ExtremeXOS 12.4.2 Release Notes
13
NOTE
Use the show version detail command to see the firmware version. Use the show fans command to see the
fan tray version and to ensure that all fans are operational before running the install firmware command. Use
the show slots command to see which slots are operational.
Table 5: BlackDiamond 20800 Series Switch Component Support
BlackDiamond 20800 Components ExtremeXOS Filenames
ExtremeXOS
Required
Firmware Version
GM-40X
uC
FPGA:A
FPGA: P
FPGA: T1
FPGA: W1 & W2
BootROM
N/A 12.4.1
2.6
0.1.6
0.0.6
0.0.11
0.0.d
0.0.3.5
XM-8X
uC
FPGA:A
FPGA: P
FPGA: D1 and D2 (manual upgrade)
FPGA: T1 & T2
FPGA: WH
BootROM
N/A 12.4.1
2.6
0.1.6
0.0.6
0.0.b
0.0.11
0.0.9
0.0.3.5
XFM-1 (shown as Fabric-1 through
Fabric-5) (BlackDiamond 20808)
uC
N/A 12.4.1
2.6
XFM-2 (shown as Fabric-1 through
Fabric-5) (BlackDiamond 20804)
uC
N/A 12.4.1
2.5
MM Basic
uC
FPGA: S
BootROM
PSUCTRL
bd20k-12.4.1.7-patch1-5.xos 12.4.1
2.6
0.3.E
0.2.1
2.7
Fan Tray (BlackDiamond 20808)
uC (shown as “Revision”)
N/A 12.4.1
2.6
Fan Tray (BlackDiamond 20804)
uC (shown as “Revision”)
N/A 12.4.1
2.6