Specifications

Process Management
ExtremeWare XOS 11.0 Concepts Guide 67
SNTP Example
In this example, the switch queries a specific NTP server and a backup NTP server. The switch is
located in Cupertino, California, and an update occurs every 20 minutes. The commands to configure
the switch are as follows:
configure timezone -480 autodst
configure sntp-client update-interval 1200
enable sntp-client
configure sntp-client primary 10.0.1.1
configure sntp-client secondary 10.0.1.2
Process Management
ExtremeWare XOS consists of a number of cooperating processes running on the switch. Under certain
conditions, you may need to stop, start, and examine information about processes.
To display information about the processes in the system, use the following command:
show process {<name>} {detail} {slot <slotid>}
To stop a running process, use the following command:
terminate process <name> [forceful | graceful] {msm <slot>}
To start a process, use the following command:
start process <name> {msm <slot>}
+4:00 +240 ZP4 - Russia Zone 3 Abu Dhabi, UAE; Muscat; Tblisi;
Volgograd; Kabul
+5:00 +300 ZP5 - Russia Zone 4
+5:30 +330 IST - India Standard Time New Delhi, Pune, Allahabad, India
+6:00 +360 ZP6 - Russia Zone 5
+7:00 +420 WAST - West Australian Standard
+8:00 +480 CCT - China Coast, Russia Zone 7
+9:00 +540 JST - Japan Standard, Russia Zone 8
+10:00 +600 EAST - East Australian Standard
GST - Guam Standard
Russia Zone 9
+11:00 +660
+12:00 +720 IDLE - International Date Line East
NZST - New Zealand Standard
NZT - New Zealand
Wellington, New Zealand; Fiji, Marshall
Islands
Table 13: Greenwich Mean Time offsets (continued)
GMT
Offset in
Hours
GMT Offset
in Minutes Common Time Zone References Cities