Specifications

316 ExtremeWare XOS 11.0 Concepts Guide
Software Upgrade and Boot Options
Returning to Factory Defaults
To return the switch configuration to factory defaults, use the following command:
unconfigure switch
This command resets the entire configuration, with the exception of user accounts and passwords that
have been configured and the date and time.
To erase the currently selected configuration image, reset all switch parameters, and reboot the switch,
use the following command:
unconfigure switch {all}
Using TFTP to Upload the Configuration
You can upload the current configuration to a Trivial File Transfer Protocol (TFTP) server on your
network. The uploaded configuration file retains your system configuration and is saved in Extensible
Markup Language (XML) format. This allows you to send a copy of the configuration file to the
Extreme Networks Technical Support department for problem-solving purposes.
You are unable to view configuration files with a text editor. To view your current switch configuration,
use the
show commands available on your switch. For more information about the show commands, see
the ExtremeWare XOS Command Reference Guide.
To upload the configuration to a TFTP server, use the following command:
tftp [<host-name> | <ip_address>] -p -l <local_file>
Where the following is true:
• host-name—Is the host name of the TFTP server
• ip_address—Is the IP address of the TFTP server
• -p—Puts the specified file from the local host and copies it to the TFTP server
• -l <local_file>—Specifies the name of the configuration file that you want to save to the TFTP
server
If you upload a configuration file and see the following message:
Error: No such file or directory
Check to make sure that you entered the filename correctly, including the .cfg extension, and that you
entered the correct host name or IP address for the TFTP server.
Displaying Configuration Files
To see a list of the configuration files in your switch, use the following command:
ls