Specifications
IP Multinetting
ExtremeWare XOS 11.0 Concepts Guide 273
These configurations are not allowed:
• VRRP VR on v1 with VRID of 99 with virtual IP addresses of 1.1.1.1 and 2.2.2.2 (the addresses are
not on the same subnet)
• VRRP VR on v1 with VRID of 99 with virtual IP addresses of 1.1.1.1 and 1.1.1.99 (one address is
owned and one address is not owned by the switch)
Configuring IP Multinetting
You configure IP multinetting by adding a secondary IP address to a vlan. Use the following command
to add a secondary IP address:
configure vlan <vlan_name> add secondary-ipaddress [<ipaddress> {<netmask>} |
<ipNetmask>]
Once you have added a secondary IP address, you cannot change the primary IP address of a VLAN
until you first delete all the secondary IP addresses. Use the following command to delete secondary IP
addresses:
configure vlan <vlan_name> delete secondary-ipaddress [<ipaddress> | all]
IP Multinetting Examples
The following example configures a switch to have one multinetted segment (port 5:5) that contains
three subnets (192.168.34.0/24, 192.168.35.0/24, and 192.168.37.0/24).
configure default delete port 5:5
create vlan multinet
configure multinet ipaddress 192.168.34.1/24
configure multinet add secondary-ipaddress 192.168.35.1/24
configure multinet add secondary-ipaddress 192.168.37.1/24
configure multinet add port 5:5
enable ipforwarding
The following example configures a switch to have one multinetted segment (port 5:5) that contains
three subnets (192.168.34.0, 192.168.35.0, and 192.168.37.0). It also configures a second multinetted
segment consisting of two subnets (192.168.36.0 and 172.16.45.0). The second multinetted segment spans
three ports (1:8, 2:9, and 3:10). RIP is enabled on both multinetted segments.
configure default delete port 5:5
create vlan multinet
configure multinet ipaddress 192.168.34.1
configure multinet add secondary-ipaddress 192.168.35.1
configure multinet add secondary-ipaddress 192.168.37.1
configure multinet add port 5:5
configure default delete port 1:8, 2:9, 3:10
create vlan multinet_2
configure multinet_2 ipaddress 192.168.36.1
configure multinet_2 add secondary-ipaddress 172.16.45.1
configure multinet_2 add port 1:8, 2:9, 3:10
configure rip add vlan multinet
configure rip add vlan multinet_2
enable rip
enable ipforwarding