Specifications

Software Factory Defaults
ExtremeWare XOS 11.0 Concepts Guide 25
NOTE
For default settings of individual ExtremeWare XOS features, see individual chapters in this guide.
QoS—DiffServ examination Disabled
Autonegotiation • 10 G modules—autonegotiation OFF, speed 10000
Mbps, full-duplex
• 1 G modules—autonegotiation ON
802.3x flow control • 10 G modules—ON
• 1 G fiber and copper—ON
Virtual LANs Two VLANs are predefined; the VLAN named default
contains all ports and belongs to the Spanning Tree
Protocol Domain (STPD) named s0. The VLAN mgmt
exists only on switches that have an Ethernet management
port and contains only that port. The Ethernet
management port is DTE only and is not capable of
switching or routing.
802.1Q tagging All packets are untagged on the default VLAN (default).
Spanning Tree Protocol Disabled for the switch; enabled for each port in the STPD.
STPD port encapsulation mode • default STPD—802.1D mode
• user-created STPD—Extreme Multiple Instance
Spanning Tree Protocol (EMISTP)
Forwarding database aging period 300 seconds (5 minutes)
IP Routing Disabled
System health check Enabled
RADIUS authentication port value 1812
RADIUS accounting port value 1813
OSPF link type Auto
VRRP priority 100
IGMP Enabled
IGMP snooping Enabled
Table 3: ExtremeWare XOS version 11.0 global factory defaults (continued)
Item Default Setting