Specifications

Configuring STP on the Switch
ExtremeWare XOS 11.0 Concepts Guide 221
The following parameters can be configured on each STPD:
• Hello time
• Forward delay
• Max age
• Bridge priority
• StpdID
The following parameters can be configured on each port:
• Path cost
• Port priority
• Port mode
NOTE
The device supports the RFC 1493 Bridge MIB, RSTP-03, and Extreme Networks STP MIB. Parameters
of the s0 default STPD support RFC 1493 and RSTP-03. Parameters of any other STPD support the
Extreme Networks STP MIB.
NOTE
If an STPD contains at least one port not in 802.1D (dot1D) mode, the STPD must be configured with
an StpdID.