Specifications

configure snmpv3 add filter
ExtremeWare XOS 10.1 Command Reference Guide 79
configure snmpv3 add filter
configure snmpv3 add filter {hex} <profile_name> subtree
<object_identifier> {/<subtree_mask>} type [included | excluded] {volatile}
Description
Adds a filter to a filter profile.
Syntax Description
Default
The default mask value is an empty string (all 1s). The other default value is non-volatile.
Usage Guidelines
Use this command to create a filter entry in the snmpNotifyFilterTable. Each filter includes or excludes a
portion of the MIB. Multiple filter entries comprise a filter profile that can eventually be associated with
a target address. Other commands are used to associate a filter profile with a parameter name, and the
parameter name with a target address.
This command can be used multiple times to configure the exact filter profile desired.
Example
The following command adds a filter to the filter profile prof1 that includes the MIB subtree
1.3.6.1.4.1/f0:
configure snmpv3 add filter prof1 subtree 1.3.6.1.4.1/f0 type included
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
profile name Specifies the filter profile that the current filter is added to.
object identifier Specifies a MIB subtree.
subtree_mask Specifies a hex octet string used to mask the subtree. For example, f7a
indicates 1.1.1.1.0.1.1.1.1.0.1.0.
included Specifies that the MIB subtree defined by <object identifier>/<mask> is to be
included.
excluded Specifies that the MIB subtree defined by <object identifier>/<mask> is to be
excluded.
volatile Specifies volatile storage.