Specifications

configure snmp sysName
ExtremeWare XOS 10.1 Command Reference Guide 75
configure snmp sysName
configure snmp sysname <sysName>
Description
Configures the name of the switch.
Syntax Description
Default
The default sysname is the model name of the device.
Usage Guidelines
You can use this command to change the name of the switch. A maximum of 32 characters is allowed.
The
sysname appears in the switch prompt.
To view the name of the system listed on the switch, use the show switch command. The show switch
command displays switch statistics including the name of the system.
Example
The following command names the switch:
configure snmp sysname engineeringlab
sysName An alphanumeric string that specifies a device name.