Specifications

show diagnostics
ExtremeWare XOS 10.1 Command Reference Guide 747
show diagnostics
show diagnostics [msm-a | msm-b | slot <slot>]
Description
Displays the status of the last diagnostic test run on the switch.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to display information from the last diagnostic test run on the switch. The following
switch diagnostics information is displayed:
• Slot number
• Result of the test (pass/fail)
• Date the test was run
• Date the test last failed (if the test has never failed, Never is displayed)
• Summary of the test (Diagnostics pass/Diagnostics fail)
In addition to the previous information, if the test passes the day, month, date, year, and time of the
diagnostic test is displayed.
Running Diagnostics on I/O modules. To run diagnostics on an I/O module, use the following
command:
run diagnostics [extended | normal] slot <slot>
Depending on the software version running on your switch, additional or different diagnostics
information might be displayed. For more information, see “run diagnostics” on page 745.
Running Diagnostics on MSM Modules. To run diagnostics on an MSM module, you must first enter
the Bootloader and then issue a series of commands. For more information, see “run diagnostics” on
page 745.
Example
The following command displays the results of module diagnostics for the I/O module in slot 4:
show diagnostics slot 4
The following is sample output from this command:
BD-10808.16 # show diagnostics slot 4
msm-a | msm- b Specifies the MSM.
slot Specifies the slot number of an I/O module.