Specifications
show bgp routes
ExtremeWare XOS 10.1 Command Reference Guide 675
show bgp routes
show bgp routes {address-family [ipv4-unicast | ipv4-multicast]} {detail}
[all
| as-path <path-expression>
| community [no-advertise | no-export | no-export-subconfed
| number <community_num> | <AS_Num>:<Num>
]
| network <ip_addr>/<mask_len>
]
Description
Displays the BGP route information base (RIB).
Syntax Description
Default
If no address family is specified, IPv4 unicast is the default.
Usage Guidelines
None.
Example
The following command displays the BGP route information base (RIB):
show bgp routes all
address-family The address family. BGP supports two address families: IPv4 Unicast and
IPv4 Multicast.
all Specifies all routes.
no-advertise Specifies the no-advertise community attribute.
no-export Specifies the no-export community attribute.
no-export-subconfed Specifies the no-export-subconfed community attribute.
community_num Specifies a community number.
AS_Num Specifies an autonomous system ID (0-65535).
Num Specifies the BGP community number.
ip_addr Specifies an IP address.
mask_len Specifies a subnet mask (number of bits).