Specifications

traceroute
ExtremeWare XOS 10.1 Command Reference Guide 65
traceroute
traceroute {vrid <vrid>} <host> {from <source IP address>} {ttl <number>}
{port <port number>}
Description
Enables you to trace the routed path between the switch and a destination endstation.
Syntax Description
Default
N/A.
Usage Guidelines
To use the host name parameter, you must first configure DNS.
Each router along the path is displayed.
Example
The following command enables the traceroute function to a destination of 123.45.67.8:
traceroute 123.45.67.8
vrid Specifies a virtual router.
host Specifies the hostname or IP address of the destination endstation.
from <source IP address> Uses the specified source address in the ICMP packet. If not specified, the
address of the transmitting interface is used.
ttl <number> Configures the switch to trace up to the time-to-live number of the switch.
port <port number> Specifies the UDP port number.