Specifications

64 ExtremeWare XOS 10.1 Command Reference Guide
Commands for Accessing the Switch
• NVRAM configuration information (primary/secondary configuration, date/time, size, version)
• PACE configuration information
• Software licensing information
• MSM information (BlackDiamond switch only)
• Mode of switch operation (Alpine 3802 only)
This information may be useful for your technical support representative if you have a problem.
Depending on the software version running on your switch, additional or different switch information
may be displayed.
Example
The following command displays current switch information:
show switch
Output from this command looks similar to the following:
SysName: BD-10808
SysLocation:
SysContact: [e-mail], [phone]
System MAC: 00:01:30:F9:9B:90
SysHealth check: Enabled
Current Time: Tue Aug 9 11:37:42 1927
Timezone: [Auto DST Disabled] GMT Offset: 0 minutes, name is UTC.
Boot Time: Tue Aug 9 11:24:10 1927
MSM: MSM-A MSM-B
------------------------ ------------------------
Current State: MASTER
Image Selected: 2 0
Image Booted: 2 0
Primary version: 10.1.0.86
Secondary version: 10.1.0.86
Config Selected: primary.cfg
Config Booted: primary.cfg