Specifications

60 ExtremeWare XOS 10.1 Command Reference Guide
Commands for Accessing the Switch
reboot
reboot {time <date> <time> | cancel} {slot <slot number> | msm <slotid>}
Description
Reboots the switch or the module in the specified slot at a specified date and time.
Syntax Description
Default
N/A.
Usage Guidelines
If you do not specify a reboot time, the switch will reboot immediately following the command, and
any previously scheduled reboots are cancelled. To cancel a previously scheduled reboot, use the
cancel option.
The slot <slot number> option is added to the command to make it possible to reboot a module in a
specific slot. When you specify this option, the command applies to the module in the specified slot,
rather than to the switch. In general, the modules that can be rebooted have separate images from the
ExtremeWare XOS image for the switch.
The modules that can be rebooted are slave or switch fabric MSM modules.
NOTE
When you configure a timed reboot of an MSM, there is no show output in the CLI to view the
configuration.
Example
The following command reboots the switch at 8:00 AM on April 15, 2002:
reboot 04/15/2002 08:00:00
date Specifies a reboot date in mm/dd/yyyy format.
time Specifies a reboot time in hh:mm:ss format.
cancel Cancels a previously scheduled reboot.
slot number Specifies the slot where the module is installed.
slotid Specifies the slot--A or B--in a BlackDiamond MSM module.