Specifications

configure ospf cost
ExtremeWare XOS 10.1 Command Reference Guide 497
configure ospf cost
configure ospf [area <area-identifier> | vlan [<vlan-name> | all]] cost
[automatic | <cost>]
Description
Configures the cost metric of one or all interface(s) or an area.
Syntax Description
Default
The default cost is automatic.
Usage Guidelines
The range is 1 through 65535.
Example
The following command configures the cost metric of the VLAN accounting:
configure ospf vlan accounting cost 10
area-identifier Specifies an OSPF area.
vlan-name Specifies a VLAN name.
all Specifies all VLANs.
automatic Determine the advertised cost from the OSPF metric table.
cost Specifies the cost metric.