Specifications

create account
ExtremeWare XOS 10.1 Command Reference Guide 49
create account
create account [admin | user] <account-name> {<password>}
Description
Creates a new user account.
Syntax Description
Default
By default, the switch is configured with two accounts with the access levels shown in Table 6.
You can use the default names (admin and user), or you can create new names and passwords for the
accounts. Default accounts do not have passwords assigned to them.
Usage Guidelines
The switch can have a total of 16 user accounts. The system must have one administrator account.
You must have administrator privileges to change passwords for accounts other than your own. User
names and passwords are case-sensitive. User account names must have a minimum of 1 character and
can have a maximum of 30 characters. Passwords must have a minimum of 0 characters and can have a
maximum of 16 characters.
The encrypted option should only be used by the switch to generate an ASCII configuration (using the
upload configuration command), and parsing a switch-generated configuration (using the download
configuration
command).
Example
The following command creates a new account named John2 with administrator privileges:
admin Specifies an access level for account type admin.
user Specifies an access level for account type user.
account-name Specifies a new user account name. See “Usage Guidelines” for more
information.
password Specifies a user password. See “Usage Guidelines” for more information.
Table 6: User Account Levels
Account Name Access Level
admin This user can access and change all manageable parameters. The admin account
cannot be deleted.
user This user can view (but not change) all manageable parameters, with the following
exceptions:
• This user cannot view the user account database.
• This user cannot view the SNMP community strings.
This user has access to the ping command.