Specifications

show iproute
ExtremeWare XOS 10.1 Command Reference Guide 485
show iproute
show iproute {priority | vlan <vlan_name> | permanent | <ip_address>
<netmask> | summary} {multicast | unicast} {vr <vrname>}}
Description
Displays the contents of the IP routing table or the route origin priority.
Syntax Description
Default
N/A.
Usage Guidelines
If a route is active and in use, it is preceded in the display by an “*”. If there are multiple routes to the
same destination network, the “*” will indicate which route is the most preferable route.The Use and
M-Use fields indicate the number of times the route table entry is being used for packet forwarding
decisions. The Use field indicates a count for unicast routing while the M-Use field indicates a count for
multicast routing. If the use count is going up unexpectedly, the software is making route decisions and
should be investigated further.
Example
The following command displays detailed information about all IP routing:
show iproute
priority Specifies a route priority.
vlan_name Specifies a VLAN name.
permanent Specifies permanent routing.
ip_address Specifies an IP address.
netmask Specifies a subnet mask.