Specifications

462 ExtremeWare XOS 10.1 Command Reference Guide
IP Unicast Commands
enable bootprelay
enable bootprelay {vrid <vrid>}
Description
Enables the BOOTP relay function.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
After IP unicast routing has been configured, you can configure the switch to forward Dynamic Host
Configuration Protocol (DHCP) or BOOTP requests coming from clients on subnets being serviced by
the switch and going to hosts on different subnets. This feature can be used in various applications,
including DHCP services between Windows NT servers and clients running Windows 95. To configure
the relay function, follow these steps:
1 Configure VLANs and IP unicast routing.
2 Configure the addresses to which DHCP or BOOTP requests should be directed, using the following
command:
configure bootprelay add <ip_address>
3 Enable the DHCP or BOOTP relay function, using the following command:
enable bootprelay
Example
The following command enables the forwarding of BOOTP requests:
enable bootprelay