Specifications

disable icmp parameter-problem
ExtremeWare XOS 10.1 Command Reference Guide 447
disable icmp parameter-problem
disable icmp parameter-problem {vlan <name>}
Description
Disables the generation of an ICMP parameter-problem message on one or all VLANs.
Syntax Description
Default
Enabled.
Usage Guidelines
Disables the generation of an ICMP parameter-problem message (type 12) when the switch cannot
properly process the IP header or IP option information. If a VLAN is not specified, the command
applies to all IP interfaces.
This command only affects the generation of certain ICMP packets. Filtering of ICMP packets usually
forwarded by the switch is controlled by the access-list commands.
Example
The following command disables the generation of an ICMP parameter-problem message on VLAN
accounting:
disable icmp parameter-problem vlan accounting
name Specifies a VLAN name.