Specifications

configure vrrp vlan vrid
ExtremeWare XOS 10.1 Command Reference Guide 411
configure vrrp vlan vrid
configure vrrp vlan <vlan_name> vrid <vridval> [[add | delete] <ipaddress>
| advertisement-interval <interval> | dont-preempt | preempt]
Description
Adds or deletes virtual IP databases.
Syntax Description
Usage Guidelines
The restrictions on this command are as follows:
• If the priority of the VR is 255, the IP address to be added must be owned by the VLAN on which
the VR exists. If the priority is not 255, the IP address must not be owned by that VLAN.
• When a VR is enabled, it must have at least one virtual IP address. When the VR is not enabled,
there are no restrictions on deleting the IP address.
• This command cannot create an invalid configuration (for example, removing the last virtual IP
address while the VR is enabled).
vlan_name Specifies the name of a VRRP VLAN.
vridval Specifies a Virtual Router ID (VRID). Value can be in the range of 1-255.
ipaddress Specifies the IP address of the virtual router in which this device participates.