Specifications

enable stpd rapid-root-failover
ExtremeWare XOS 10.1 Command Reference Guide 399
enable stpd rapid-root-failover
enable stpd <stpd_name> rapid-root-failover
Description
Enables rapid root failover for faster STP recovery times.
Syntax Description
Default
Disabled.
Usage Guidelines
After you have created the STPD with a unique name, the keyword stpd is optional.
To view the status of rapid root failover on the switch, use the show stpd command. The show stpd
command displays information about the STPD configuration on the switch including the
enable/disable state for rapid root failover.
Example
The following command enables rapid root fail over on STPD Backbone_st:
enable stpd backbone_st rapid-root-failover
stpd_name Specifies an STPD name on the switch.