Specifications

configure stpd hellotime
ExtremeWare XOS 10.1 Command Reference Guide 377
configure stpd hellotime
configure stpd <stpd_name> hellotime <seconds>
Description
Specifies the time delay (in seconds) between the transmission of Bridge Protocol Data Units (BPDUs)
from this STPD when it is the Root Bridge.
Syntax Description
Default
2 seconds.
Usage Guidelines
After you have created the STPD with a unique name, the keyword stpd is optional.
You should not configure any STP parameters unless you have considerable knowledge and experience
with STP. The default STP parameters are adequate for most networks.
The range for the <seconds> parameter is 1 through 10 seconds.
Example
The following command sets the time delay from STPD1 to 10 seconds:
configure stpd stpd1 hellotime 10
stpd_name Specifies an STPD name on the switch.
seconds Specifies the hello time in seconds. The range is 1 to 10 seconds.