Specifications

376 ExtremeWare XOS 10.1 Command Reference Guide
STP Commands
configure stpd forwarddelay
configure stpd <stpd_name> forwarddelay <seconds>
Description
Specifies the time (in seconds) that the ports in this STPD spend in the listening and learning states
when the switch is the Root Bridge.
Syntax Description
Default
15 seconds.
Usage Guidelines
After you have created the STPD with a unique name, the keyword stpd is optional.
You should not configure any STP parameters unless you have considerable knowledge and experience
with STP. The default STP parameters are adequate for most networks.
The range for the <seconds> parameter is 4 through 30 seconds.
Example
The following command sets the forward delay from STPD1 to 20 seconds:
configure stpd stpd1 forwarddelay 20
stpd_name Specifies an STPD name on the switch.
seconds Specifies the forward delay time in seconds. The range is 4 to 30 seconds.