Specifications

374 ExtremeWare XOS 10.1 Command Reference Guide
STP Commands
When the switch boots, it automatically creates a VLAN named default with a tag value of 1, and STPD
s0. The switch associates VLAN default to STPD s0. By default, all ports that belong to this VLAN and
STPD are in 802.1d encapsulation mode.
Example
The following command specifies that all ports added to the STPD STPD1 be in PVST+ encapsulation
mode:
configure stpd stpd1 default-encapsulation pvst-plus