Specifications

370 ExtremeWare XOS 10.1 Command Reference Guide
STP Commands
clear counters stp
clear counters stp {[all | diagnostics | domains | ports]}
Description
Clears, resets all STP statistics and counters.
Syntax Description
Default
N/A.
Usage Guidelines
If you do not enter a parameter, the result is the same as specifying the all parameter: the counters for
all domains and all ports are reset.
Enter one of the following parameters to reset the STP counters on the switch:
• all—Specifies the counters for all STP domains and ports
• diagnostics—Clears some of the internal diagnostic counters
• domains—Clears the domain level counters
• ports—Clears the counters for all ports and leaves the domain level counters
Viewing and maintaining statistics on a regular basis allows you to see how well your network is
performing. If you keep simple daily records, you will see trends emerging and notice problems arising
before they cause major network faults. By clearing the counters, you can see fresh statistics for the time
period that you are monitoring.
Example
The following command clears all of the STP domain and port counters:
clear counters stp
all Specifies all STP domain and port counters.
diagnostics Specifies STP diagnostics counters.
domains Specifies STP domain counters.
ports Specifies STP port counters.