Specifications

show access-list counter
ExtremeWare XOS 10.1 Command Reference Guide 355
show access-list counter
show access-list counter {<countername>} [any | ports <portlist>] {ingress}
Description
Displays the specified access list counters.
Syntax Description
Default
The default direction is ingress.
Usage Guidelines
Use this command to display the ACL counters.
Example
The following example displays all the counters the ACL on port 2:1
show access-list counter port 2:1
The output of this command is similar to the following:
ACL/Counter Direction Packet Count Byte Count
============================================================
test ingress
counter1 0 0
counter2 0 0
counter3 0 0
counter4 0 0
counter5 0 0
counter6 0 0
countername Specifies the ACL counter to display.
portlist Specifies to display the counters on these ports.