Specifications

configure access-list
ExtremeWare XOS 10.1 Command Reference Guide 329
configure access-list
configure access-list <aclname> [any | ports <portlist>] {ingress}
Description
Configures an access list to the specified interface.
Syntax Description
Default
The default direction is ingress.
Usage Guidelines
The access list applied in this command is contained in a text file created externally to the switch. The
file is transferred to the switch using TFTP before it is applied to the ports. The ACL name is the file
name without its “.pol” extension. For example, the ACL blocknetfour would be in the file blocknetfour.pol.
Specifying the keyword any applies the ACL to all the ports, and is referred to as the wildcard ACL.
This ACL is evaluated for ports without a specific ACL applied to it, and is also applied to packets that
do not match the ACL applied to the interface.
Example
The following command configures the ACL test to port 1:2 at ingress:
configure access-list test ports 1:2
The following command configures the ACL mydefault as the wildcard ACL:
configure access-list mydefault any
aclname Specifies the ACL name. The name can be from 1-32 characters long.
portlist Specifies the ports on which this ACL is applied.