Specifications

320 ExtremeWare XOS 10.1 Command Reference Guide
Commands for Status Monitoring and Statistics
unconfigure log target format
unconfigure log target [console | memory-buffer | nvram | session | syslog
[all | <ipaddress> [local0 ... local7]]] format
Description
Resets the log target format to its default values.
Syntax Description
Default
When a target format is unconfigured, it is reset to the default values.
The following defaults apply to console display, memory buffer, NVRAM, and session targets:
• timestamp—hundredths
• date—mm-dd-yyyy
• severity—on
• event-name—condition
• sequence-number—off
• process-name—off
• process-id—off
• source-line—off
The following defaults apply to syslog targets (per RFC 3164):
• timestamp—seconds
• date—mmm-dd
• severity—on
• event-name—none
• sequence-number—off
• process-name—off
• process-id—off
console Specifies the console display format.
memory-buffer Specifies the switch memory buffer format.
nvram Specifies the switch NVRAM format.
session Specifies the current session (including console display) format.
syslog Specifies a syslog target format.
all Specifies all remote syslog servers.
ipaddress Specifies the syslog IP address.
local0 ... local7 Specifies the local syslog facility.
format Specifies that the format for the target will be reset to the default value.