Specifications

show powersupplies
ExtremeWare XOS 10.1 Command Reference Guide 309
Example
The following command displays the status of the installed power supplies. If a power supply is not
installed, the state of the power supply is
Empty:
show powersupplies
The following is sample output from this command:
PowerSupply 1 information:
State: Empty
PowerSupply 2 information:
State: Empty
PowerSupply 3 information:
State: Power On
Input Voltage: 110.0 V
PartInfo: PS Slot # 4 SN: 1234567 PN:1N2039-1
Revision: 0.1
FailureCode: 0
Odometer: 936000 seconds since Dec-09-2003
Temperature: 29.0 deg C
Output 0: 48.0 V, 700.0 W
Output 1: 12.0 V, 48.0 W
Input: 240.0 V, 1.0 Amps
Voltage 1: 2.0 V, 1.0 A
Voltage 2: 4.0 V, 2.0 A
PowerSupply 4 information:
State: Power On
Input Voltage: 110.0 V
PartInfo: PS Slot # 5 SN: 1234567 PN:1N2039-1
Revision: 0.1
FailureCode: 0
Odometer: 936100 seconds since Dec-09-2003
Temperature: 29.0 deg C
Output 0: 48.0 V, 700.0 W
Output 1: 12.0 V, 48.0 W
Input: 240.0 V, 1.0 Amps
Voltage 1: 2.0 V, 1.0 A
Voltage 2: 4.0 V, 2.0 A
PowerSupply 5 information:
State: Power On
Input Voltage: 220.0 V
PartInfo: PS Slot # 6 SN: 1234567 PN:1N2039-1
Revision: 0.1
FailureCode: 0
Odometer: 936200 seconds since Dec-09-2003
Temperature: 29.0 deg C
Output 0: 48.0 V, 1200.0 W
Output 1: 12.0 V, 48.0 W
Input: 240.0 V, 1.0 Amps
Voltage 1: 2.0 V, 1.0 A
Voltage 2: 4.0 V, 2.0 A