Specifications

show fans
ExtremeWare XOS 10.1 Command Reference Guide 279
show fans
show fans {detail}
Description
Displays the status of the fans in the system.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to view detailed information about the health of the fans.
This status information may be useful for your technical support representative if you have a network
problem.
The following fan information is collected by the switch:
• State—The current state of the power supply. Options are:
— Present: The fan is installed.
— Failed: The fan failed.
— Empty: There is no fan installed.
• Fans—The input voltage of the power supply.
• PartInfo—Information about the fan tray including the:
— Slot number where the fan is installed.
— Serial number, a collection of numbers and letters, that make up the serial number of the fan.
— Part number, a collection of numbers and letters, that make up the part number of the fan.
• Revision—The revision number of the fan.
• FailureCode—Specifies the failure code of the fan.
• GridID—Specifies the grid ID of the fan.
• Odometer—Specifies the date and how long the fan tray has been operating.
• Temperature—Specifies, in celsius, the current temperature of the fan.
• Voltage 1 and Voltage 2—Specifies the voltage of the fan.
• Fan Speeds—Specifies, in revolutions per minute (rpm), the speed of the fan.
detail Specifies more detailed fan tray information.