Specifications

show checkpoint-data
ExtremeWare XOS 10.1 Command Reference Guide 277
show checkpoint-data
show checkpoint-data {<process>}
Description
Displays the status of one or more processes being copied from the primary MSM to the backup MSM.
Syntax Description
Default
N/A.
Usage Guidelines
This command displays, in percentages, the amount of copying completed by each process and the
traffic statistics between the process on both the primary and the backup MSMs.
Example
The following command displays the checkpointing status and the traffic statics of all of the processes
between the primary and the backup MSM:
show checkpoint-data
The following is sample output from this command:
Process Tx Rx Sent Total % Chkpt Debug-info
------------------------------------------------------------------
devmgr 235 143 7 7 100% ON OK 1 (00008853)
ems 0 0 0 0 0% ON OK 1 (000008D3)
msgsrv 0 0 0 0 100% ON OK 1 (000008D3)
nodemgr 0 0 0 0 0% ON OK 1 (000008D3)
dirser 0 0 0 0 0% ON OK 1 (000008D3)
cfgmgr 49 49 100 100 100% ON OK 1 (000018D3)
cli 0 0 0 0 0% ON OK 1 (000018D3)
snmpSubagent 0 0 0 0 0% ON OK 1 (000018D3)
snmpMaster 0 0 0 0 0% ON OK 1 (000008D3)
edp 0 0 0 0 0% ON OK 1 (000008D3)
vlan 256 4 0 0 100% ON OK 1 (000008D3)
aaa 0 0 0 0 0% ON OK 1 (000008D3)
fdb 14 2 0 0 100% ON OK 1 (000008D3)
stp 0 0 0 0 0% ON OK 1 (000008D3)
rtmgr 2 2 0 0 100% ON OK 1 (000008D3)
netTools 0 0 0 0 0% ON OK 1 (000008D3)
acl 0 0 0 0 0% ON OK 1 (000008D3)
mcmgr 2 2 0 0 100% ON OK 1 (000008D3)
ospf 0 0 0 0 0% ON OK 1 (000008D3)
polMgr 0 0 0 0 0% ON OK 1 (000008D3)
rip 0 0 0 0 0% ON OK 1 (000008D3)
telnetd 0 0 0 0 0% ON OK 1 (000008D3)
process Specifies the name of the processes being copied.