Specifications

ExtremeWare XOS 10.1 Command Reference Guide 25

1 Command Reference Overview

Introduction

This guide provides details of the command syntax for all ExtremeWare XOS commands as of

ExtremeWare XOS version 10.1.

NOTE

ExtremeWare XOS 10.1 only supports Extreme Networks BlackDiamond

10800 family of products.

This does not include the other BlackDiamond families, Alpine, Summit “i” series, Summit e-series and

Summit 200 series platforms.

This guide does not provide feature descriptions, explanations of the technologies, or configuration

examples. For information about the various features and technologies supported by Extreme Networks

switches, see the installation and user guides for your product. This guide does not replace the

installation and user guides; this guide supplements the installation and user guides.

Audience

This guide is intended for use by network administrators who are responsible for installing and setting

up network equipment. It assumes a basic working knowledge of the following:

• Local area networks (LANs)

• Ethernet concepts

• Ethernet switching and bridging concepts

• Routing concepts

• Internet Protocol (IP) concepts

• Routing Information Protocol (RIP) and Open Shortest Path First (OSPF) concepts

• Border Gateway Protocol (BGP-4) concepts

• IP Multicast concepts

• Distance Vector Multicast Routing Protocol (DVMRP) concepts

• Protocol Independent Multicast (PIM) concepts

• Internet Packet Exchange (IPX) concepts