Specifications

configure diffserv examination code-point qosprofile
ExtremeWare XOS 10.1 Command Reference Guide 227
configure diffserv examination code-point qosprofile
configure diffserv examination code-point <code-point> qosprofile
<qosprofile>
Description
Configures the default ingress Diffserv code points (DSCP) to QoS profile mapping.
Syntax Description
Default
See Table 8.
Usage Guidelines
You can specify up to 64 different code points. Code point values are grouped and assigned to the
default QoS profiles as shown in Table 8:
Example
The following command specifies that packets arriving on ports 5-8 that use code point 25 be assigned
to qp2:
configure diffserv examination code-point 25 qosprofile qp2
ports 2:1-2:2
code-point Specifies a DiffServ code point (a 6-bit value in the IP-TOS byte in the IP
header).
qosprofile Specifies the QoS profile to which the Diffserv code point is mapped.
Table 8: Default Code Point-to-QoS Profile Mapping
Code Point QoS Profile
0-7 Qp1
8-15 Qp2
16-23 Qp3
24-31 Qp4
32-39 Qp5
40-47 Qp6
48-55 Qp7
56-63 Qp8