Specifications

190 ExtremeWare XOS 10.1 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
show slot
show slot <slot number>
Description
Displays the slot-specific information.
Syntax Description
Default
N/A.
Usage Guidelines
The show slot command displays the following information:
• The name of the module installed in the slot
• The serial number of the module
• The part number of the module
• The state of the module, whether the power is down, if the module is operational, if a diagnostic
being run, if there is a mismatch between the slot configuration and the module in the slot
• The status of the ports on the module
If you do not specify a slot number, information for all slots is displayed.
Example
The following example displays module information for all slots:
show slot
slot number Specifies a slot on a modular switch.