Specifications

show edp
ExtremeWare XOS 10.1 Command Reference Guide 181
show edp
show edp {ports [all | <ports>] {detail}}
Description
Displays connectivity and configuration information for neighboring Extreme Networks switches.
Syntax Description
Default
N/A.
Usage Guidelines
On a modular switch, <ports> can be a list of slots and ports. For a detailed explanation of port
specification, see “Modular Switch Numerical Ranges” or “Line-Editing Keys” in Chapter 1.
Use the show edp command to display neighboring switches and configurations. This is most effective
with Extreme Networks switches.
Example
The following command displays the configuration of the switch:
show edp
Following is the output from this command:
EDP advert-interval :60 seconds
EDP holddown-interval :180 seconds
EDP enabled on ports :1:1 1:2 1:3 1:4 1:5 1:6 3:1 3:2 3:3 3:4
The following command displays the connectivity and configuration of neighboring Extreme Networks
switches:
show edp ports 7:1 detail
Following is the output from this command:
=============================================================================
Port 7:1: EDP is Enabled
Tx stats: sw-pdu-tx=37 vlan-pdu-tx=36 pdu-tx-err=0
Rx stats: sw-pdu-rx=36 vlan-pdu-rx=490 pdu-rx-err=0
Time of last transmit error: None
Time of last receive error: None
Remote-System: Alpine3808 Age = 42
ports Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all ports.
detail Show detailed information.