Specifications

174 ExtremeWare XOS 10.1 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
enable port
enable port [<port_list> | all]
Description
Enables a port.
Syntax Description
Default
All ports are enabled.
Usage Guidelines
Use this command to enable the port(s) if you disabled the port(s) for security, administration, or
troubleshooting purposes.
On a modular switch, <port_list> can be a list of slots and ports. For a detailed explanation of port
specification, see “Modular Switch Numerical Ranges” or “Line-Editing Keys” in Chapter 1.
Example
The following command enables slot 1, ports 3, 5, and 12 through 15 on the modular switch:
enable port 1:3, 1:5, 1:12-1:15
port_list Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all ports on the switch.