Specifications

show dhcp-client state
ExtremeWare XOS 10.1 Command Reference Guide 121
show dhcp-client state
show dhcp-client state
Description
Displays the current DHCP/BOOTP client state for each vlan.
Syntax Description
This command has no arguments or variables.
Default
Displays the client state for all existing VLANs.
Usage Guidelines
None.
Example
The following command displays the DHCP/BOOTP status for all VLANs:
show dhcp-client state
Depending on your configurations, output from this command is similar to the following:
Client VLAN Protocol Current State
------------------------ -------- -----------------------------------------
Default BOOTP Received IP address configured on vlan
accounting DHCP DHCP state; Requesting
Mgmt None
A total of 3 vlan(s) where displayed